Iridium SHOUT ns General Description Manual page 38

6.2.2.1.3.3 Emergency Awake LED Sequence
This parameter sets whether to display the Emergency LED Sequence. In this state, all six
(6) LEDs blink simultaneously, at a one (1) second interval, for as long as the emergency
mode is active and the device is awake. If the emergency behavior is turned off, the device
will fall back to using the normal behavior.
6.2.2.1.3.4 Iridium LED
This parameter sets whether to display the Iridium "IRDM" LED. When enabled, the Iridium
LED stays solid when the Iridium signal strength is between 3–5 bars, blinks when the Iridium
signal strength is between 1–2 bars, and stays off when the Iridium signal strength is at 0
bars.
6.2.2.1.3.5 GPS LED
This parameter sets whether to display the GPS "GPS" LED. When enabled, the GPS LED stays
solid when there is a valid GPS position fix, blinks when there is 2D fix or using dead reckoning,
and stays off when unable to obtain a position fix.
NAL Research Corporation (451-01001.B)
Figure 13. General Profile window with LED tab.
38