Table of Contents
Advertisement
INSTALL FLAP CONTROL HORN
Install the lap control horn using the
same method as same as the aileron con-
trol horns.
1.
Fiberglass control horn
2.
3.
Flap control horn
Epoxy
INSTALLING THE AILERON SERVOS
1.
2.
Minimum servo spec.
Torque : 194 oz-in (14 kg-cm) @ 6.0V;
236 oz-in ( 17kg-cm) @ 7.4V
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
7
Advertisement
Table of Contents
