Table of Contents
Advertisement
Giant Zero A6M Gas ARF 50-60cc, 86"
3.
Use drill bit in a pin vise to drill the
mouting holes in the blocks.
4.
Apply 2-3 drops of thin C/A to each of
the mounting holes. Allow the C/A to
cure without using accelerator.
5.
C/A glue
8
Use dental loss or heatshrink tube to
secure the connection so they cannot be-
come unplugged.
6.
using Phillips screwdriver and the screws
provided with the servo.
7.
1.5mm
Apply 1-2 drops of thin C/A to each of
the mounting tabs. Allow the C/A to cure
without using accelerator.
8.
Remove the string from the wing at the
servo location and use the tape to attach it
to the servo extension lead. Pull the lead
through the wing and remove the string.
Instruction Manual.
Secure the servo to the aileron hatch
C/A glue
Advertisement
Table of Contents
