21.
Attach the speed control to the side of
the motor box using two-sided tape and
tie wraps. Connect the appropriate leads
from the speed control to the motor. Make
sure the leads will not interfere with the
operation of the motor.
22.
23.
Battery
INSTALLING THE SPINNER
Install the spinner backplate, propeller
and spinner cone.
1.
he propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
2.
INSTALLING VERTICAL STABILIZER
1.
29