Table of Contents
Advertisement
10.2 Configuration
10.2.1
Configure
The configure screen provides all configuration options.
Anonymous Mode:
When checked, this enables the tailBeacon to
transmit a self-assigned (random) ICAO and
non-identifying Call Sign when the squawk
code matches the defined VFR squawk code
(1200). When enabled, the operator will not
be eligible to receive ATC services.
Call Sign:
The CALL SIGN can be up to an 8-digit code
that corresponds to the tail number of the
aircraft. (0-9, A-Z). Note: This is typically
your aircraft N-number (e.g. N8644B), unless
otherwise advised by the FAA or ATC.
ICAO Number:
The ICAO address is a 24-bit number issued
to the aircraft by the registration authority of
the aircraft. These addresses are usually
written as a 6-digit hexadecimal number.
Vso (knots):
This parameter allows tailBeacon to
automatically switch between airborne and
ground modes and should be set to the
aircraft stall speed. For rotorcraft, set to 0.
ADS-B In Capability:
Sets the ADS-B In equipment capability
reporting. This is used to indicate the existing
aircraft configuration.
Tap "Update" when complete.
UAV-1002185-001
Rev D
32
Advertisement
Table of Contents
