Table of Contents
Advertisement
7.4.2 Adapter Mounting
In addition to the direct mounting plate UAV-1001383-001, an adaptive
mounting plate is required for fitment on some tail cone installations such
as used on Ercoupes. The Ercoupe adapter serves as an interface
between the aircraft structure and the tailBeacon direct mounting plate.
Figure 2: Generic representation of adapter style mounting.
7.4.2.1 Adapter Mounting Dimensions
7.4.2.2 Adapter Installation
The adapter installation kit is supplied with two #6-32 Socket Head Cap
Screws to support typical mounting hardware for securing the adapter to
the tail cone. Once the adapter is installed, the tailBeacon Mounting Plate
installation is identical to a Direct Mount with the only change being the
length of the #4 screws, and the thread lock required on them. Ensure a
thread locking compound is on the end of the screw. If you need to
UAV-1002185-001
26
Rev D
Advertisement
Table of Contents
