Table of Contents
Advertisement
11 Normal Operation
tailBeacon must be enabled (turned ON) during all phases of flight
including surface movement operations. To ensure tailBeacon is enabled,
aircraft power to the position light must remain on.
A red LED annunciator is visible beneath the lens cover on the starboard
(when installed) side of the device, as shown below. It indicates the
operating status of the tailBeacon.
12 Support
For additional questions or support please visit:
https://uavionix.com/support/
UAV-1002185-001
Rev D
LED Indication
On (Constant)
Blinking (On/off
every second)
Off
Meaning
Device Failure
Internal self-test failure
Invalid ICAO configured
Function Failure
No GPS fix
ADS-B broadcast failure
No Failure
36
Advertisement
Table of Contents
