Panasonic CF-W2 Series Reference Manual page 87

SD Memory Card Security Function
5
Choose the key (SD memory card) setting method (A).
[Leave set]
To leave the SD memory card in place instead of entering a password
(The card may be removed after the computer or Windows is started.)
[Set and eject]
To set and eject the SD memory card instead of entering a password
The setting method is set separately for each computer. Different SD memory
cards may not use different setting methods on the same computer.
If you use a different method between starting the computer and logging on to
Windows:
In this screen, you can set the setting method for logging on to Windows. To set the
method when starting the computer, run the Setup Utility and change the setting of
[SD Setting Method] in the [Security] menu after completing the SD Card Setup.
( page 124)
6
Make the settings according to their intended.
To use when starting the computer
An SD memory card will be registered with the computer (Up to two cards can be
registered)
87