Panasonic CF-W2 Series Reference Manual page 48

Security Measures
When you do not want your computer to be used without
permission
Setting the Password on boot (enabling, disabling)
When you do not want the User Password enabled or changed without
permission:
Set [User Password Protection] using the following procedure:
A Using the key and the
Enter key.
B
Using either the
8
F10
Press the
When [Password on boot] is set to [Enable], it is impossible to start the computer without
knowing the password.
NOTE
You cannot set [Password on boot] without setting the Supervisor Password. Set the
Supervisor Password if you have not done so (
When starting up the Setup Utility, the password input screen will be displayed if a
Supervisor Password or Use Password has been set, even if [Password on boot] is set
to [Disable]
1
Run the Setup Utility. (
2
Using either the
3
Using either the
Enter
press the
key, select [User Password Protection] and press the
key, select [Protected] and press the Enter key.
key or the
key and select [Yes], then press the
page 117)
key or the key, select [Security].
key or the key, select [Password on boot] and
key.
48
Enter
key.
page 45)