Panasonic CF-W2 Series Reference Manual page 130

Dealing with Problems (Advanced)
Starting Up
The power indicator or battery
indicator is not lit
The computer does not operate when
a USB device is connected
[Enter Password] is displayed
POST Startup Error(s) is displayed
Windows startup, or an operation is
extremely slow
The date and time are incorrect
When a problem occurs, refer to this page. If a problem appears to be related to a software
application, refer to the software sections of the manual. If you still cannot troubleshoot the
problem, contact your technical support office. You can use the PC Information Viewer to
check the computer's usage status (
Check the cable connection for the AC adaptor
Check to see if a fully charged battery is properly inserted
Remove the battery pack and disconnect the AC adaptor, then connect them
again
The computer may not operate when certain USB devices are connected.
Disconnect the USB device, or set [Legacy USB Support] to [Disable] in the
[Advanced] menu of the Setup Utility (
Input your Supervisor Password or User Password. If you forget your password,
a fee will be charged for repairs. Contact your technical support office
⇒ Operating Instructions "List of Error Codes"
Press the F9 key in the Setup Utility (
This will restore the Setup Utility's settings to their default values (except for the
password, System Date, and System Time). Then, the Setup Utility must be
run once again for you to input the appropriate operating environment settings.
(The processing speed depends on the application software used, so this
operation may not cause the processing speed to increase)
If operations slow down during streaming playback, try changing the number of
colors of the display
If you install resident software after purchasing this computer, disable the
resident software
You can set the date and time using the following menu:
[start] - [Control Panel] - [Date, Time, Language, and Regional Options] - [Date
and Time]
If you continue to experience problems, the internal battery maintaining the
clock may need to be replaced. Contact your technical support office
When the computer is connected to a LAN, confirm the date and time of the
server
This computer will not correctly recognize the date and time starting from the
year 2100 A.D.
page 149).
page 122)
page 117).
130