Panasonic CF-W2 Series Reference Manual page 114

Wireless LAN
The Settings
To use the wireless LAN, set the profile using the following procedure.
The settings will vary for different network environments depending on the network system
being used. For more details, ask your system administrator or the person in charge of the
network.
CAUTION
Set profiles for each user using the following procedure.
1
Double-click the
When the icon or the
The wireless LAN is on. Start from step
When the icon is displayed:
[Wireless LAN] in the [Advanced] menu of the Setup Utility may be set to [Disable].
Set to [Enable] using the following procedure.
A
Restart the computer.
Press the F2 key while [Panasonic] boot screen is displayed soon after the
B
computer begins the startup procedure.
If a password is set, [Enter Password] will be displayed. Enter your password,
and press the Enter key.
Select [Wireless LAN] in the [Advanced] menu and press the Enter key, then
C
select [Enable] from the menu displayed and press the Enter key.
Press the F10 key.
D
At the confirmation message, select [Yes] and press the Enter key.
The computer will restart.
Start again from step
2
Click your wireless LAN adaptor and click [General].
icon on the notification area.
icon displayed:
2
.
1
.
114