Panasonic CF-W2 Series Reference Manual page 74

Writing to CDs
• After formatting the disk, if the disk does not mount (is not recognized), remove it, and
insert it again
• Eject the formatted disks as described below
When ejecting the disk while the
• Right-click the icon and click [Eject].
Only eject disks as described above.
• If you cannot eject the disk even after attempting the operation described above, shut
down Windows. After the power is off, insert a pointed object (e.g., the bent-out tip of a
paper clip, or the tip of a ballpoint pen) into the emergency hole (A) and move it in the
direction of the arrow
Be sure to shut down B's Recorder before logging off Windows
Do not use the Fast User Switching function
If this function is used, the
tion area after the switching is complete, and B's Recorder cannot be used. If this
happens, log-off all users, and then log-on to Windows with the user you want to use
Do not add the check mark for [Enable CD recording on this drive] in [Properties] -
[Recording] of the DVD-ROM & CD-R/RW drive
icon is displayed on the notification area:
icon or the icon will no longer be shown on the notifica-
74