Panasonic CF-W2 Series Reference Manual page 142

Dealing with Problems (Advanced)
Connecting Peripherals
Your peripheral does not work
The mouse does not move the
cursor
The device will not operate if a
different mouse driver is installed
Make sure a driver is installed
Contact the manufacturer of the product
When operation resumes from the standby or hibernation mode, devices such
as a mouse, modem or PC Cards may not function properly. In such cases,
you will need to restart your computer or reinitialize the individual devices
When is displayed in the Device Manager, try removing and inserting the
device once more. If the problem persists, restart the computer
Depending on the device connected, the computer may not recognize when the
device is connected or disconnected, or the device may not operate properly.
Use the following procedure:
A Click [start] - [Control Panel] - [Performance and Maintenance] -
[System] - [Hardware] - [Device Manager].
B
Select the applied device, and remove the check mark for [Allow the
computer to turn off this device to save power] in [Power
Management]. (This item may be unavailable for some types of
devices.)
Check your mouse connection
A driver which is compatible with the connected mouse must be installed
If the device does not operate when the driver is installed:
In the Setup Utility, set [Touch Pad] to [Disable] (
When you install a different mouse driver, such as IntelliPoint for Microsoft's
IntelliMouse, the mouse driver currently installed in the computer may need to
be uninstalled. Use the following procedure to uninstall this driver:
A Display the screen to uninstall the program.
Click [start] - [Control Panel] - [Add or Remove Programs].
B
Uninstall [Synaptics Pointing Device Driver] and [TouchPadUtility]
separately.
142
page 120)