Panasonic CF-W2 Series Reference Manual page 41

Standby/Hibernation Functions
Using the Power Switch
• Closing or opening the display
It may take one or two minutes to enter standby or hibernation mode
In standby or hibernation mode
Do not insert or remove peripherals; abnormal operation may result
In standby mode, power is consumed. If PC Cards are inserted, more of that power is
consumed. When all power has been consumed, all data saved at standby is lost since it
is retained in memory. We therefore recommend plugging in the AC adaptor when using
the standby function
Setting
1
Click [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2
Click [Stand by] or [Hibernate] for [When I press the power button on
my computer], and then click [OK].
Entering the standby or hibernation mode
1
Slide the power switch (A); release your finger at the beep
The computer will enter either the standby or hibernation mode, depending on the
setting.
CAUTION
After releasing your finger from the power switch, do not touch it until the power
indicator goes off or blinks
41
*1
sound.