Watching DVD Video
Running WinDVD
Usage Precautions
WinDVD is a software application for DVD playback.
Here you will find explanations and general information on precautions to take, and how to
access the online manual.
Refer to the online manual for the detailed use of the software application.
(
page
68)
You can run WinDVD using either of the following procedures:
Double-click the
icon on the desktop
Click [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD]
Do not start WinDVD under the following conditions:
While the hard disk drive indicator
on.
While WinDVD is running, do not perform the following:
Entering the standby or hibernation mode
Switching the display by pressing the Fn + F3 key
If performing the operations described above, shut down WinDVD, then restart.
During video playback, do not perform the following:
Ejecting the disk
Using other applications or the Command Prompt
Changing the settings of the screen properties
If performing the operations described above, shut down WinDVD, then restart.
is blinking immediately after the computer is turned
67