Panasonic CF-W2 Series Reference Manual page 77

PC Cards
This slot conforms to the PC Card Standard; therefore, communications and SCSI devices
may be utilized. There are three types of card, differentiated by their thickness: Type I (3.3
mm), Type II (5.0 mm), and Type III (10.5 mm). The slot allows you to use one Type I or Type
II card.
CAUTION
Check the PC Cards' specifications. To avoid damage, be sure the total operating
current does not exceed the specified limit
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
ZV card, SRAM card, FLASH ROM card (except for an ATA interface) and cards
requiring 12V are not supported
With the repeated insertion/removal of a PC Card, the computer may no longer
recognize the PC Card (depending on the type of card). In such cases, restart the
computer
If the computer freezes after resuming from the standby or hibernation mode, try
removing and then reinserting the PC Card. If this does not correct the problem,
restart the computer
77