Panasonic CF-W2 Series Reference Manual page 42

Standby/Hibernation Functions
When Closing the Display
*1
At the beep sound, release your finger from the power switch. If you continue to
slide the power switch and hold it for more than four seconds, the computer will emit a
*1
second beep then power off. Data not previously saved will be lost.
Even when [When I press the power button on my computer] is set to [Shut down] with
[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced], if you slide the power switch for more than four seconds and do not
release it, a second beep
not previously saved will be lost
*1
When the speaker function is disabled, e.g., by the key combination
sound.
Setting
1
Click [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2
Click [Stand by] or [Hibernate] for [When I close the lid of my portable
computer], and then click [OK].
Entering the standby or hibernation mode
1
Close the display.
The computer will enter either the standby or hibernation mode, depending on the
setting.
When entering the standby or hibernation mode, close the display correctly. If
you do not, (for example, if you open the display soon after you close it) the
computer may not enter standby or hibernation mode
*1
will sound and the power will be turned off forcibly. Data
42
Fn F4
+ , there will be no beep