Panasonic CF-W2 Series Reference Manual page 127

Setup Utility
Boot Menu
Set priorities (displayed in order from top to bottom) for devices that start up the operating
system.
To move a device up by one in the order, select the device with the
then press the F6 key.
To move a device down by one in the order, select the device with the
and then press the F5 key.
Panasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup
(recommended)
Floppy Drive
Hard Disk Drive
CD/DVD Drive
*1
LAN
*1
This is not displayed when [LAN] or [Boot up from LAN] is set to [Disable] on the [Advanced] menu.
NOTE
The [Boot] menu cannot be changed when the Setup Utility is started up with the User
Password
Boot Menu
The device for starting up the operating system can also be selected during computer
start-up. After the computer is turned on and the Esc key is pressed at [Panasonic]
boot screen, [Boot Menu] (the device selection screen) will appear. When the [Boot]
menu setting is changed, the selection screen display will also change. [Boot Menu] is
displayed only when [Boot First Menu] in the [Security] menu is set to [Enable]
127
key and the key, and
key and the key,