Panasonic CF-W2 Series Reference Manual page 81

SD Memory Card/MultiMedia Card
81
• Touch the metal terminals with your hands or with metal
• Remove the labels on the card / Attach other labels or seals to the card
Do not leave the card in the following locations:
• Locations that can become very hot, like inside a car in direct sunlight
• Dusty locations or locations that are very humid
• Locations subject to corrosive gas, etc.
When logging on to Windows/ resuming from standby or
hibernation mode
Do not remove or insert the SD memory card until Windows has completed loading
After resuming from standby or hibernation mode, do not access the SD memory card for
about 30 seconds
Protecting important data
Set the write-protect switch (A) to the LOCK position. Unlock the switch when you want to
record (checkout), edit, or save data
Use an oil-base felt-tip pen to write in the memo area (B) on the card. Do not use a pencil
or ball-point pen. Doing so can damage the card body or destroy data stored in the card
Do not remove the card or turn off the device:
• While data is being read from the card
• While data is being written to the card, or for a short time after the writing operation
• While the SD memory card indicator is lit
(Note that Panasonic assumes absolutely no liability for any loss of data recorded by the
user, or any other damages, direct or indirect)
During these operations removing the card can destroy data stored in the card
We recommend backing up important data to another storage medium
When disposing of cards, we recommend that you physically destroy the card (for
example, by using a hammer) to prevent personal or confidential data from being leaked