Panasonic CF-W2 Series Reference Manual page 71

Watching DVD Video
If you cannot play the disk contents smoothly:
In the case of some operating environments or DVD videos, playback may not be smooth,
or audio may become distorted when using fast-forward ("time stretch")
A Right-click on the WinDVD screen, click [Setup] - [Video].
B
Confirm that the check mark is added to [Use Hardware Decode Acceleration]
and [Use Hardware Color Acceleration].
The display may flicker, depending on the disk. In this case, delete the check mark for
[Use Hardware Decode Acceleration] using step
In the Extended Desktop or simultaneous (internal/external) display mode, there are times
when images or video are not displayed correctly
If the DVD video software other than WinDVD has been installed, the images and videos
may not be displayed properly (
When the playback screen appears too white:
Right-click on the WinDVD screen, and click [Setup] - [Video] to display the [Color Preset]
setting screen, and then set [Color Preset] to [Custom].
To change color settings in WinDVD, click
and set [Brightness], [Contrast], and [Color] on the sub-panel
When battery operation time has become short:
Set [Deinterlace] to [Auto]. If this is set to [Advanced], the CPU usage rate increases, and
more battery power is consumed.
(Click on the WinDVD control panel, then click [Display] to show the sub-panel for
changing the [Deinterlace] setting)
Before using the capture function in WinDVD
First, remove the check mark from [Use Hardware Decode Acceleration].
(To display the [Use Hardware Decode Acceleration] setting screen, right-click on the
WinDVD screen, and click [Setup] - [Video])
B described above
page 68)
on the WinDVD control panel, click [Color],
71