4.3.5 Cam data creation
1.
Creating a new cam data
1. Right click on [Cam Data], and select [Add New Data...] to open the New Data window.
2. Set the cam No.
3. Select "Set by Stroke Ratio" and "Cam Curve" in the Setting Method.
4. Click [OK]. The cam data creation screen appears.
5. Make a rough cam graph by dragging an end of the cam waveform.
6. Based on the rough cam data, modify the end point and stroke to finish the cam data.
4 SYNCHRONOUS CONTROL STARTUP
58
4.3 Parameter Creation for Synchronous Control
2.
1.
5.
6.
3.
4.
View video: