Radio List - ZyXEL Communications NXC Series User Manual

Table 43 Monitor > Wireless > AP Information > AP List > Change mode behavior
LABEL
OK
Cancel

6.12 Radio List

Use this screen to view statistics about the wireless radio transmitters in each of the APs connected to the
NXC. To access this screen, click Monitor > Wireless > AP Information > Radio List.
Figure 58 Monitor > Wireless > AP Information > Radio List
The following table describes the labels in this screen.
Table 44 Monitor > Wireless > AP Information > Radio List
LABEL
Hide/Show
Advanced
Settings
Radio List
Enable Column
Freeze
More Information
Slot
Loading
AP Description
Frequency Band
Chapter 6 Monitor
DESCRIPTION
Click OK to save your changes back to the AP.
Note: The AP will be set to Nebula cloud management mode and removed
from the managed AP list right after you click OK.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this button to display a greater or lesser number of configuration fields.
Select the check box to freeze the first column (#) so it will be always visible when you scroll
through the list. Clear the check box to unfreeze the column.
Click this to view additional information about the selected radio's SSID(s), wireless traffic and
wireless clients. Information spans a 24 hour period.
This is the radio's index number in this list.
This indicates the AP's load balance status (AP UnderLoaded or AP OverLoaded) when load
balancing is enabled on the AP. Otherwise, it shows - when load balancing is disabled or the
radio is in monitor mode.
This displays the description of the AP to which the radio belongs.
This indicates the wireless frequency currently being used by the radio.
This shows - when the radio is in monitor mode.
NXC Series User's Guide
102