Editing Usb Storage Log Settings - ZyXEL Communications NXC Series User Manual

30.3.3 Editing USB Storage Log Settings

The Edit Log on USB Storage Setting screen controls the detailed settings for saving logs to a connected
USB storage device. Go to the Log Settings Summary screen, and click the USB storage Edit icon.
Figure 234 Configuration > Log & Report > Log Settings > Edit (USB Storage)
The following table describes the labels in this screen.
Table 188 Configuration > Log & Report > Log Settings > Edit (USB Storage)
LABEL
Duplicate logs to
USB storage (if
ready)
Active Log
Selection
#
Chapter 30 Log and Report
DESCRIPTION
Select this to have the NXC save a copy of its system logs to a connected USB storage device.
Use the Active Log section to specify what kinds of messages to include.
Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and alerts for
all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
This field is a sequential value, and it is not associated with a specific entry.
NXC Series User's Guide
383