Step 3 Vlan Settings - ZyXEL Communications NXC Series User Manual

Figure 21 Wizard: Step 2 Uplink Connection and Management VLAN

4.2.3 Step 3 VLAN Settings

The NXC ports the managed APs are connected to must be in the same VLAN interface to
communicate with each other. Apart from this, you also need to connect your managed APs to the
correct ports according to the settings of the VLAN interface in order to communicate with the NXC.
Click the Add button to add a new VLAN interface, or select an entry and click the Edit button to
configure an existing VLAN interface.
• Name: This field displays the interface name of this VLAN.
• IP Address: This field displays the IP address of this VLAN.
• VID: This field displays the VLAN ID.
• Member: This field displays the ports that are members of this VLAN. You cannot configure members
for VLAN interfaces in the Wizard. The default members are ports 2-6 (ge2-6).
• Guest VLAN: This field displays whether this is a guest VLAN and whether the captive portal (web
authentication) feature is enabled.
Chapter 4 Setup Wizard
NXC Series User's Guide
49