Language - ZyXEL Communications NXC Series User Manual

Figure 228 Configuration > System > Auth. Server > Add/Edit
The following table describes the labels in this screen.
Table 182 Configuration > System > Auth. Server > Add/Edit
LABEL
Activate
Profile Name
IP Address
Netmask
Secret
Description
OK
Cancel

29.13 Language

Click Configuration > System > Language to open this screen. Use this screen to select a display
language for the NXC's Web Configurator screens.
Figure 229 Configuration > System > Language
Chapter 29 System
DESCRIPTION
Select this check box to make this profile active.
Enter a descriptive name (up to 31 alphanumerical characters) for identification purposes.
Enter the IP address of the RADIUS client that is allowed to exchange messages with the NXC.
Enter the subnet mask of the RADIUS client.
Enter a password (up to 64 alphanumeric characters) as the key to be shared between the
NXC and the RADIUS client.
The key is not sent over the network. This key must be the same on the external authentication
server and the NXC.
Enter the description of each server, if any. You can use up to 60 printable ASCII characters.
Click OK to save the changes.
Click Cancel to discard the changes.
NXC Series User's Guide
373