Configure Radio Setting For Rssi Threshold - ZyXEL Communications NXC 2500 Handbook

www.zyxel.com

3.2.1 Configure Radio Setting for RSSI Threshold

1 Go to CONFIGURATION > Object > AP Profile > Radio, click
Add to add a new 2.4GHz radio, RSSI_Threshold, for setting RSSI
threshold. Click Show Advanced Settings to check Enable
Signal Threshold, and edit the value for Station Signal
Threshold and Disassociation Station Threshold. Click OK. The
station needs signal strength at least -76dBm to make
connection with AP, and when the signal is less than -80dBm,
the AP disconnects with client.
67/225