Ethernet Neighbor - ZyXEL Communications NXC Series User Manual

Table 34 Monitor > System Status > USB Storage (continued)
LABEL
Speed
Status
Detail

6.10 Ethernet Neighbor

The NXC uses Smart Connect, that is Link Layer Discovery Protocol (LLDP) for discovering and configuring
LLDP-aware devices in the same broadcast domain as the NXC that you're logged into using the web
configurator.
LLDP is a layer-2 protocol that allows a network device to advertise its identity and capabilities on the
local network. It also allows the device to maintain and store information from adjacent devices which
are directly connected to the network device. This helps you discover network changes and perform
necessary network reconfiguration and management.
Note: Smart Connect is enabled by default in the NXC.
Use this screen to view the NXC's neighboring devices in one place. To access this screen, click Monitor
> System Status > Ethernet Neighbor.
Figure 50 Monitor > System Status > Ethernet Neighbor
Chapter 6 Monitor
DESCRIPTION
This field displays the connection speed the USB storage device supports.
Ready - you can have the NXC use the USB storage device.
Click Remove Now to stop the NXC from using the USB storage device so you can remove it.
Unused - the connected USB storage device was manually unmounted by using the
Remove Now button or for some reason the NXC cannot mount it.
Click Use It to have the NXC mount a connected USB storage device. This button is grayed
out if the file system is not supported (unknown) by the NXC.
none - no USB storage device is connected.
This field displays any other information the NXC retrieves from the USB storage device.
Deactivated - the use of a USB storage device is disabled (turned off) on the NXC.
OutofSpace - the available disk space is less than the disk space full threshold (see
29.3 on page 334 for how to configure this threshold).
Mounting - the NXC is mounting the USB storage device.
Removing - the NXC is unmounting the USB storage device.
none - the USB device is operating normally or not connected.
NXC Series User's Guide
85
Section