Add/Edit Schedule One-Time Rule - ZyXEL Communications NXC Series User Manual

24.2.1 Add/Edit Schedule One-Time Rule

The Add/Edit Schedule One-Time Rule screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen and click either the Add icon or an Edit
icon in the One Time section.
Figure 175 Configuration > Object > Schedule > Add/Edit (One-Time)
The following table describes the labels in this screen.
Table 145 Configuration > Object > Schedule > Add/Edit (One-Time)
LABEL
Configuration
Name
Date Time
Start Date
Start Time
Stop Date
Stop Time
OK
Cancel
Chapter 24 Schedules
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-31 alphanumeric
characters, underscores( ), or dashes (-), but the first character cannot be a number. This
_
value is case-sensitive.
Specify the year, month, and day when the schedule begins.
Year - 1900 - 2999
Month - 1 - 12
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule begins.
Hour - 0 - 23
Minute - 0 - 59
Specify the year, month, and day when the schedule ends.
Year - 1900 - 2999
Month - 1 - 12
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Specify the hour and minute when the schedule ends.
Hour - 0 - 23
Minute - 0 - 59
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
NXC Series User's Guide
300