Add/Edit Zymesh Profile - ZyXEL Communications NXC Series User Manual

21.2.1 Add/Edit ZyMesh Profile

This screen allows you to create a new ZyMesh profile or edit an existing one. To access this screen, click
the Add button or select and existing profile and click the Edit button.
Figure 165 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
The following table describes the labels in this screen.
Table 135 Configuration > Object > ZyMesh Profile > Add/Edit ZyMesh Profile
LABEL
Profile Name
ZyMesh SSID
Pre-Shared Key
OK
Cancel
Chapter 21 ZyMesh Profile
DESCRIPTION
Enter up to 31 alphanumeric characters for the profile name.
Enter the SSID with which you want the managed AP to connect to a root AP or repeater to
build a ZyMesh link.
Note: The ZyMesh SSID is hidden in the outgoing beacon frame so a wireless
device cannot obtain the SSID through scanning using a site survey tool.
Enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including
spaces and symbols) or 64 hexadecimal characters.
The key is used to encrypt the wireless traffic between the APs.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
NXC Series User's Guide
287