Removing The Deck Pickup Roller - Canon Paper Deck Unit-F1 Service Manual

2. Remove the Deck Feed Roller[1].
• 1 Claw[2]
1x
NOTE:
How to install the Deck Feed Roller
Be sure to align the groove [2] of the Deck Feed Roller [1]
with the protrusion [3] of the One-way Clutch to install the
roller.
[3]
Be sure to insert the Deck Feed Roller [1] until the claw [2]
is hooked.
1x
■ Actions when Replacing the Parts
1. Clear the parts counter.
(LV1) COPIER > COUTER > DRBL-2 > PD-FD-RL
[1]
[2]
[1]
[2]
[2] [1]
39
Removing the Deck Pickup
Roller
■ Preparation
1. Remove the Left Upper
Upper Cover" on page 36
■ Procedure
CAUTION:
Be sure not to touch the surface of the roller at
disassembling/assembling.
1. Slide the Slide Guide (Upper)[1] in the direction of
the arrow until it stops.
NOTE:
When attaching the Left Upper Cover, return the Slide
Guide (Upper) to the original position as shown in the
figuer.
4. Disassembly/Assembly
Cover."Removing the Left
[1]