Canon Paper Deck Unit-F1 Service Manual page 60

3. Set the Long Lifter Wire on front side of the Large
Pulley. Set the Short Lifter Wire on rear side of it.
CAUTION:
The Lifter Wire may be disconnected by wrong
assembling. Put the Short Lifter Wire between the roller
and the fixing plate from the left side.
Roller
Short lifter wire
Long lifter wire
Left
Roller
Short lifter wire
Long lifter wire
Left
Rear
Front
Fixing plate
Right
Rear
Front
Fixing plate
Right
54
4. Fix the Large Pulley[1] on top right of the
Compartment[2].
• 1 Screw[3]
1x
4. Disassembly/Assembly
[1]
[3]
[2]