Lifter Wire; Removing The Lifter Wire - Canon Paper Deck Unit-F1 Service Manual

Lifter Wire

Removing the Lifter Wire

■ Preparation
CAUTION:
The Lifter Plate must be moved to the bottom before
removing the Lifter Wire.
1. Open the Compartment with the open button and
then remove all sheets of paper from it.
2. Press the relay paper sensor until the lifter reaches
to the bottom position.
3. Turn OFF the host machine and remove the lattice
connector.
4. Remove the Compartment."Removing the
Compartment " on page 43
5. Remove the Front Cover."Removing the Front
Cover" on page 36
■ Procedure
● Deck Lifter Motor Assembly
1. Remove the Deck Lifter Motor Assembly[1].
• 4 Wire saddles[2]
• 1 Reuse band[3]
• 3 Connectors[4]
• 5 Screws[5]
5x
[4]
50
4. Disassembly/Assembly
3x 5x
[3]
[2]
[5]
[1]
[5]
[2]
[4]