Opening the Compartment
■ Procedure
1. Insert screwdrivers into the hole at rear left side of
the compartment[2] and then release the lever[1] to
open it.
NOTE:
• Insert screwdrivers into the hole at arrowhead
marking.
• The lever locates above the hole, so insert
screwdriver upward through the hole.
Removing the Compartment
■ Preparation
1. Open the
Compartment."Opening the
Compartment " on page 43
2. Removing the Right
Cover " on page 36
[1]
[2]
Cover."Removing the Right
■ Procedure
1. Open the Compartment[1] until it stops while
releasing stoppers[2] with pressing left and right
Latches.
4 Screws[3]
[2]
4x
[1]
2. Set sheets of paper (approx.6cm) under both side of
the Compartment to prevent deformation of the
wheel plate.
43
4. Disassembly/Assembly
[3]
[3]
[2]