Canon Paper Deck Unit-F1 Service Manual page 65

6. Attach the Wire Pulley[1] and then put the Long Lifter
Wire in the groove.
• 1 Parallel Pin[2]
[2]
[1]
F F
NOTE:
Pull the Long Lifter Wire[1] from bottom right of the
Compartment[2] and attach it without slackness.
[1]
[2]
59
7. Attach the Pulley Fixing Plate[1].
• 1 E-ring[2]
NOTE:
Attach the Pulley Fixing Plate to the Wire Pulley with fitting
the U-shaped groove.
[1]
[2]
8. Attach the Lifter Wire Fixing Cover[1].
• 1 Screw[2]
CAUTION:
Do not nip the Lifter Wire between the Lifter Wire Fixing
Cover and the pole.
1x
[1]
[2]
4. Disassembly/Assembly