3. Relocate the paper guide plate at the specified paper
length.
Paper size is marked as shown in the figure.
• 1 Screw
1x
Paper Size
CAUTION:
The paper jam may occur when the paper size is
different between top and bottom of the paper guide
plate.
4. Set paper in the compartment and close it.
5. Set the paper size on the service mode.
(Lv.1) COPIER > OPTION > ACC > DK-P
• 0: A4
• 1: LTR
• 2: B5
1x
Paper Size
imageRUNNER ADVANCE
4500 Series
■ Preparation of the Paper Deck
1. Remove the screw of the fixing plate.
• 1 Screw
1x
89
6. Installation