Factory Settings (Function 99) - Siemens OXYMAT 64 Operating Instructions Manual

Operation
5.4 Operating functions
In order to keep the analog current output at a defined value during the changeover
procedure, you can also use function 77 (store analog output). An active functional check
then keeps the analog current output at the selected value.
See also
Analog output memory (function 77) (Page 91)
5.4.6.19

Factory settings (function 99)

Factory settings
The following functions
Caution:
Manipulations in this
level may permanently in-
terfere with the analyzer.
Figure 5-70
With this function, the operator can access the factory functions level. These settings are
intended only for maintenance personnel and are therefore protected by an additional code.
After activating this function, a message appears which prompts you to enter the
corresponding code.
102
are exclusively for
MAINTENANCE PERSONNEL
:....:
-Press ESC to return-
Default settings
O
2
Operating Instructions, 06/2008, A5E00880383-03
OXYMAT 64