Safety Practices and Hazards
Color Coding
The various indicator lights appearing on Agilent instruments and associated
accessories are color coded to represent the status of the instrument or
accessory.
A green light indicates the instrument is in normal/standby mode.
An orange light indicates that a potential hazard is present.
A blue light indicates that operator intervention is required.
A red light warns of danger or an emergency.
CE Compliance
Your Agilent 700 Series ICP-OES instrument has been designed to comply with the
requirements of the Electromagnetic Compatibility (EMC) Directive and the Low
Voltage (electrical safety) Directive (commonly referred to as the LVD) of the
European Union. Agilent has confirmed that each product complies with the
relevant Directives by testing a prototype against the prescribed EN (European
Norm) standards.
Proof that a product complies with these directives is indicated by:
the CE Marking appearing on the rear of the product, and
the documentation package that accompanies the product containing a copy
of the Declaration of Conformity. The Declaration of Conformity is the legal
declaration by Agilent that the product complies with the directives listed
above, and shows the EN standards to which the product was tested to
demonstrate compliance.
14
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide