3D Systems Cube User Manual page 9

The printer will load the print file.The estimated time to completion is noted at
the bottom of the screen. The blue bar at the top is also a progress indicator that
shows the status of the loading process.
The print jets that will print the creation will begin heating up.
!
CAUTION: Do not touch the print jets until they have cooled to room
temperature.
7. After the print jets have the correct temperature the print will begin.
Press the time at the bottom of the screen to view the percentage of completion.
Press it again to view how many layers have been printed. After a few seconds,
the default time will appear again.
Press PAUSE to temporarily stop printing. Press CANCEL if you wish to cancel
the print job.
3D Systems, Inc. 8