3D Systems Cube User Manual page 8

3rd generation personal 3d printer, cubify app

Hide thumbs Also See for Cube:

Table of Contents

If there is not enough material to complete the print but you want to use up the

remaining material, press accept to continue.

If the file was built with colors that are not installed, the printer will give you the

option to change either the color of the creation or the cartridge. To replace the

cartridge color to match the creation file, select

CHANGE CARTRIDGE

and refer

to the section titled Replacing A Material Cartridge. To change the color of the

build to one that matches an installed cartridge color, select

CHANGE COLOR.

You will be given the option to select a different color among the installed cartridg-

es. Press a cartridge icon and a currently installed color will appear. Pressing it

again will select another installed color if applicable. Once you have made your

choice, press accept to continue.

The material type (PLA or ABS) installed in the printer must match the original

build file specifications.

The cartridge icon with a line through it indicates a color from the original build

file that is not installed in the printer.

6. Apply a light coat of Cube Glue to the center of the print pad, as described here.

Press

to continue.

NOTE: Ensure the glue has dried before printing.

3D Systems, Inc.

Table of Contents

Need help?

Do you have a question about the Cube and is the answer not in the manual?