Cube Info - 3D Systems Cube User Manual

Raft and Support: Selection of the types of materials used to create rafts and supports
Raft Material
Support Material
Support Type

Cube Info

Cartridge Status
See the status of the connected printers cartridges, tap
Cube printer.
3D Systems, Inc.
- A raft is a base that adheres the bottom of the creation to the print pad. Choose
material of the raft or to print without a raft.
- Models that contain overhanging surfaces may need supports to print successfully.
- Points: Fine points that are easy to remove. It is best for curved surfaces.
- Line: Line intersects the part. It is best for flat surfaces.
Firmware
Click Update
Printer name
Serial Number
Part fan
Printjet fan
Wi-Fi Connection
Bluetooth
Find Cubes on the network
the network.
Find a Cube manually
connect manually.
Order certridges to go to the page where you can order cartridges for your
22
- Shows firmware version of the connected printer.
to update to newest version.
- Name of the connected printer.
- Serial number of the connected printer.
- Status of part fan.
- Status of printjet fan.
- Wi-Fi network connection.
- Status of the printer's bluetooth.
- Find Cube printers connected to
- Enter the IP-address of the Cube to