Update Application - 3D Systems Cube User Manual

3rd generation personal 3d printer, cubify app

Table of Contents

APPLYING CUBE GLUE

Cube Glue contains waster-soluble glue that adheres the part to the print pad. It is important that glue is applied to the print pad before

starting any print to ensure that the creation does not move during the printing process.

The glue contains a foam applicator under the cap. It is recommended that the bottle is turned upside-down with the cap on to allow the

glue to settle into the applicator before applying.

For best results, apply two thin layers of glue to the print pad using slow circular motions when prompted by the touchscreen display.

Apply glue in a pattern that is slightly larger than the footprint of the creation you are printing.

Layer 1

Apply a thin layer of glue.

Layer 2

Apply a second thin layer of glue to the print pad in the opposite direction.

UPDATE APPLICATION

Update the app in the Play Store. Tap on

My Apps

and find Cubify, if there are updates available the app will be labled Update.

3D Systems, Inc.

Table of Contents

Do you have a question about the Cube and is the answer not in the manual?