Application as directed
NOTICE
Please observe the notes in the following chapters!
▶
Safety instructions
^ 11
▶
Information on mechanical installation
▶
Information on electrical installation
The product must only be actuated under the operating conditions and power limits
•
specified in this documentation.
The product meets the protection requirements of 2014/35/EU: Low-Voltage Directive.
•
The product is not classed as a machine under 2006/42/EU: Machinery Directive.
•
No machine is to be commissioned or put into operation as intended in conjunction with
•
the product until it has been determined that the machine meets the regulations of EC
Directive 2006/42/EU: Machinery Directive; observe EN 60204−1.
Commissioning or putting into operation as intended is only permitted in compliance with
•
the EMC Directive 2014/30/EU.
The product is not a household appliance. Instead, it is a component that is intended
•
exclusively for further use in the context of commercial or professional use as defined by
EN 61000−3−2.
The product can be used according to the technical data if the drive systems have to
•
comply with categories in accordance with EN 61800−3.
In residential areas, the product may cause EMC interferences. The operator is responsible
•
for taking interference suppression measures.
Do not use the built-in brakes as fail-safe brakes. Disruptive factors that cannot be
•
influenced may cause the braking torque to be reduced.
The product is only to be operated together with an inverter.
•
Foreseeable misuse
Actuate directly on the mains voltage
•
Use in potentially explosive areas
•
Use in aggressive environments
•
Use under water
•
Use under radiation
•
Use in generator mode
•
^ 22
^ 23
Information on project planning
Safety instructions
Application as directed
13