Mounting The Transmitter - GE HygroPro User Manual

Chapter 1: Installation

1.3 Mounting the Transmitter

!CAUTION!
If the HygroPro will be installed directly into the process
line, consult GE for proper installation instructions and
precautions before proceeding.
Refer to Figure 2 below and complete the steps on the next page to
install the HygroPro transmitter.
Probe Hex Nut
3/4-16 UNF-2A
Shield
Figure 2: HygroPro Installation
Page 4 HygroPro User's Manual