2.2.4 Setting Up the Display
To set up the display, complete the following steps:
If you wish to change the display Contrast, at the above screen,
highlight that choice and press enter.
HygroPro User's Manual
Use the up and down keys to select
Display and press enter. Then, enter
your passcode and press enter.
Use the up and down keys to select
Display and press enter.
If the display type is acceptable, press
escape to return to the previous menu.
To change the display type, use the up
and down keys to select
and press enter.
Reverse
Use the arrow keys to change the
Contrast value and press enter. Then
press escape twice to return to the main
menu.
Chapter 2: Operation
or
Normal
Page 25