Parameter Assignment Over Device With Display; Input Type 1 [01] - Siemens SITRANS TH100 Operating Instructions Manual

Parameter assignment

9.3 Parameter assignment over device with display

Sensor calibration (Page 162)
Transmitter sensor matching (Page 165)
Operating hours counter (Page 166)
Current output (Page 167)
9.3 Parameter assignment over device with display
Introduction
This section describes all parameters that you can reach over the device with a display.
You will find information on operating the device with display in the section Operating the
device with display (Page 107).
You can find the list of available parameters with ID and parameter name in the section List of
parameters on the display (Page 109).
9.3.1

Input type 1 [01]

Selects the input type 1.
Setting range:
Factory setting:
138
Indication on the display
P100I
P500I
P1k I
TC B
TC E
TC J
TC K
TC N
TC R
TC S
TC T
TC L
TC U
P100I
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Meaning
Pt100 - IEC 751
Pt500 - IEC 751
Pt 1000 - IEC 751
TC Type B - IEC 584
TC Type E - IEC 584
TC Type J - IEC 584
TC Type K - IEC 584
TC Type N - IEC 584
TC Type R - IEC 584
TC Type S - IEC 584
TC Type T - IEC 584
TC Type L - IEC 584
TC Type U - DIN 43710
Pt100 - IEC 751
Operating Instructions, 05/2020, A5E41864807-AB