Installing The Transmitter In The Raised Cover Of The Connection Head - Siemens SITRANS TH100 Operating Instructions Manual

Installing/mounting
5.2 Installing SITRANS TH in a connection head
Procedure
1. Place the springs on the fixing screws.
2. Secure the lock washers.
Figure 5-1
3. Secure the transmitter with the fixing screws in the connection head base.
Figure 5-2
5.2.2

Installing the transmitter in the raised cover of the connection head

Condition
The transmitter is only designed for installation in a type B connection head or larger.
66
①
Fixing screw M4x35
③
Round plate
Securing the lock washer
①
Transmitter
③
Connection head
Securing the transmitter in the connection head base
②
Transmitter
④
Lock washer DIN 6799 - 3.2 A2
SITRANS TH100/TH320/TH420/TR320/TR420/TF320/TF420 with 4 to 20 mA/HART
Operating Instructions, 05/2020, A5E41864807-AB