Step 9: Complete the Installation Map
The Enphase Installation Map is a diagrammatic representation of the physical location of each
microinverter in your PV installation. You will create the virtual array in Enlighten from this map. Use the
scanning tool feature from the Enphase Installer Toolkit to easily build and configure a system. Refer to
http://enphase.com/installer-toolkit/
If you prefer to build the table manually, use the blank map on page 38 to record microinverter placement
for the system, or provide your own layout if a larger or more intricate installation map is required.
To manually build the Installation Map:
a. Each Enphase Microinverter has a removable serial number label located on the mounting
plate. Peel the removable serial number label from each Enphase Microinverter and affix it to
the respective location on the Enphase installation map (see map on page 38). Remember to
keep a copy of the installation map for your records.
b. Remember to keep a copy of the installation map for your records.
23
for more information.
2015 Enphase Energy Inc. All rights reserved.
C250 System Installation and Operation
141-00025 Rev 03