Product Description - Axis 2N LiftIP User Manual

1.1 Product Description

Basic Features
®
2N LiftIP is primarily designed for sites where a LAN is available.
®
2N LiftIP is a Speakerphone on principle. This means that a microphone and a
speaker built-in behind the lift button panel are used for bidirectional
communication.
®
Connect 2N
either from an external 10–30 V DC / 0.5 A power supply or directly from the
LAN if equipped with PoE 802.3af supporting elements.
®
2N LiftIP can only be used for making calls to pre-programmed numbers and
cannot be misused for "calling at someone else's account".
Connection of an almost unlimited count of communicators is a great advantage.
Advantages of Use:
Basic announcement set playing
Optimum acoustic properties
Adjustable speaker volume via audio unit buttons (during a call)
Recording of up to 8-minute long announcements (10 user messages)
Recording of user digits in a language other than that of the voice menu
Check call function once in 3 days (programmable)
Function indication – two LEDs meeting the applicable lift regulations
Easy control and configuration – voice menu
Setting option via the Service Tool application
Automatic redialling of up to six numbers
Protection against unintentional/useless startup (CANCEL)
Call control from control centre
No additional power supply requirement if PoE is used
Easy installation into any lift button panel
Powerful indication options – illuminated pictograms (including bulbs)
DTMF via RFC-2833 or in-band
2N TELEKOMUNIKACE a.s., www.2n.cz
LiftIP to your LAN using an RJ-45 connector. Feed
®
2N LiftIP
6/117