Page 1
® Lift8 Audio unit – machine room Brief Manual www.2n.cz Version 3.0.0...
Page 3
The machine room audio unit is intended for installation in the machine room or as an intercom solution located in the reception. Connector description On the right side under the cover there are 3 connectors: Bus connection Loosen the screws to the right and open the connector cover. There is just one connector under the cover: a bus connector.
Page 4
Group of 8 jumpers for address configuration: If the machine room is shared by multiple lifts, use one audio unit and configure several addresses using the included jumpers. The other audio unit types do not have this possibility! Note Having set more addresses for the audio unit, press the TRIPHONY button to ...
Page 5
Tato hláska je určena pro instalaci ve strojovně, případně pro řešení Interkom s umístěním na recepci. Popis konektorů Na pravém boku pod krytem se nacházejí 3 konektory: Připojení na sběrnici Uvolněte šroubek na pravém boku a otevřete kryt konektorů. Pod ním se nachází konektor pro připojení...
Page 6
Poznámka Nastavení jiného umístění hlásky není možné. Tato hláska je vždy nastavena jako strojovna. Pravá skupina 8 propojek: nastavení adresy. Pokud je strojovna společná pro více výtahů, je možné použít jednu hlásku a nastavit více adres pomocí přiložených propojek.