Axis 2N LiftIP User Manual page 63

Par. Parameter
No. name
1101 IP address
1102 Subnet mask
1103 Default
gateway
1104 DNS server
1105 SIP server
1106 User
1107 Password
1108 Enable in-band
DTMF detector
1109 SIP server port
1110 Registration
validity
1111 Authentication
name
1112 Display name
2N TELEKOMUNIKACE a.s., www.2n.cz
Range of Default
values value
empty
empty
empty
empty
empty
up to 64 empty
characters
up to 32 empty
characters
0–1 0
1–65535 5060
0–3600 s 0 s
empty
empty
Note
IP address assigned to the Ethernet
interface (VoIP module). **
Gives the subnet bit mask. **
Sets the IP address of the router or
PC via which communication is made
outside the internal network. **
Represents the IP address of the DNS
server. **
Represents the IP address for login to
the counterparty (PBX, operator). **
Represents the user name for login to
the counterparty (PBX, operator). **
Represents the password for login to
the counterparty (PBX, operator). **
If you enable an in-band DTMF
detector, all others DTMF detectors
will be disabled.**
Represents the PBX (operator) port
via which the SIP Proxy
communicates with the terminals
connected. **
0 = registration validity not sent
(assigned by the counterparty)**
Set the name used for authentication.
Set the name displayed on the peers
device.
63/117